- 450X4X32/Z-108 circular widia saw

- Industrial numeric control.
- Graphic and mono-chromatic LCD display (125x75h).
- Formulae and typologies program with the machine description and indications about the machining.
- Typologies up to 6 variables.
- Section height memorisation with trigonometric calculation for the cutting longitude compensation.
- Kit 3,5” floppy disc unit to enlarge the memorisation of section heights and formulae + typologies.
- Height erection jig with piece meter and cutting disable functions.
- Calculator function.
- Management, in each phase of the program, of the automatic correction for differences in varnishing thickness and/or extrusion tolerance.
- 300 lines cutting list, allowing to tape in, including size and quantity of pieces, headstocks inclination, shaping height with automatic compensation in cuttings at 45º, shaping code and measure cycles repetition.
- Step by step program for non-predetermined cutting longitude: If the bar longitude is bigger than the machine longitude, with this program, the machine can recover the bar.

- Usable cutting length: 4000 mm. / 5000 mm. /        6000 mm.
- Min. cutting measure at 90º: 300 mm. / 300 mm. / 300 mm.
- Size: 5765x1600x1615 / 6765x1600x1615 / 7765x1600x1615.
- Weight: 1500 kg. / 1750 kg. / 2100 Kg.
- Triphasic 50Hz engine at 220 or 380v.
- Low pressure pneumatic horizontal and vertical clamps in non-operating phase.
- Suction conveyor connectors.
- Hydro-pneumatic headstock advance (cutting).
- Spraying Lubrication.
- Pneumatic headstocks inclination.
- Air pressure: 7 BAR (recordable).